No products
Prices are tax included
Main Pumps
-
Electric
- Ozone
- Circulation Pumps
- Pumps, Motors & Parts
-
PCB's Packs and Panels
- Balboa
- Pres Air
- Gecko
- Correct Tech
- Hydro Quip
- Sundance
- D1 Spas
- Joyonway by Balboa
- Master Spas
- Invensys
- ACC
- OEM
- Spanet
- Lighting
- Sensors and Switches
- Electrical Sundries
- Speakers and Audio
- Heating
- Harvia Sauna Heaters
- Superior Pool and Spa Centre
- LX
- Air
- Gear
-
Water
- Divertor Valves
- On/Off Valves
- Slice and Ball Valves
- Thermowells
- Unions
- Manifolds
- Floor Drains
- Suction
- Pipe
- Fittings
- Water Filtration
- Check Valves
- Water Features
- Drain valves
- Water Chlorination
- Pipe Clamps
- Gaskets and O Rings
-
Jets and Bodies
- Diffusers & Jets Pieces
- Water Jets
- Waterway Jet Bodies
- SCS Jet Bodies
- Waterway Jet Tools
- Hand-Held Jets
- Wellis
- CMP Products
- FILTERS
- Cycle Valves
- HotSpring-Caldera
New products
-
Balboa Clim8zone Heat Pump
Clim8zone – Intelligent Spa Water Heating & CoolingThe most...
-
-
-
BP200UX 3kw + Expander Board
Balboa BP200UX 3kw which also includes the expander board, 59233
-
-
-
-
-
-
-
-
-
LX - WEE5
LX WEE5 circulation pump. An EXACT replacement for the Hotspring E5 and...
-
-
0.5hp Circ pump
Spanet circulation pump 350W (0.5hp) Circulation pump, 40mm unions inc...
-
-
3hp 2 speed
Spanet Smartflo Boost Pump 2200w (3.0hp) Two speed booster pump, 50mm...
-
2.5hp 2 speed
Spanet Smartflo Boost Pump 1850w (2.5hp) Two speed booster pump, 50mm...
-
2.5hp 1 speed
Spanet Smartflo Boost Pump 1850w (2.5hp) Single speed booster pump,...
-
1.5hp 2 speed
Spanet Smartflo Boost Pump 100w (1.5hp) Two speed booster pump, 50mm...
LX wet ends for models :
LP200 LP300
WP200 WP250 WP300
Main Pumps There are 4 products.
-
2" LX Pump union O Rings (x2)
Sold in pairs These ONLY fit 2" LX pump unions used on LP and WP 150, 200, 250, 300
-
LP200 and WP200 LX
Complete LX wet end - eveything inside. No messing with impellers and seals. Simply bolt the complete went end onto your motor. This wet end is the correct power for the LP 200 and WP200 pumps.
-
LP250 and WP250 WET250
Complete wet end - eveything inside. No messing with impellers and seals. Simply bolt the complete went end onto your motor. This wet end is the correct power for the LP 250 and WP250 pumps.
-
LP300 and WP300 LX
Complete LX wet end - eveything inside. No messing with impellers and seals. Simply bolt the complete went end onto your motor. This wet end is the correct power for the LP 300 and WP 300 pumps.
