No products
Prices are tax included
Poly Storm
-
Electric
- Ozone
- Circulation Pumps
- Pumps, Motors & Parts
-
PCB's Packs and Panels
- Balboa
- Pres Air
- Gecko
- Correct Tech
- Hydro Quip
- Sundance
- D1 Spas
- Joyonway by Balboa
- Master Spas
- Invensys
- ACC
- OEM
- Spanet
- Lighting
- Sensors and Switches
- Electrical Sundries
- Speakers and Audio
- Heating
- Harvia Sauna Heaters
- Superior Pool and Spa Centre
- LX
- Air
- Gear
-
Water
- Divertor Valves
- On/Off Valves
- Slice and Ball Valves
- Thermowells
- Unions
- Manifolds
- Floor Drains
- Suction
- Pipe
- Fittings
- Water Filtration
- Check Valves
- Water Features
- Drain valves
- Water Chlorination
- Pipe Clamps
- Gaskets and O Rings
-
Jets and Bodies
- Diffusers & Jets Pieces
- Water Jets
- Waterway Jet Bodies
- SCS Jet Bodies
- Waterway Jet Tools
- Hand-Held Jets
- Wellis
- CMP Products
- FILTERS
- Cycle Valves
- HotSpring-Caldera
New products
-
Balboa Clim8zone Heat Pump
Clim8zone – Intelligent Spa Water Heating & CoolingThe most...
-
-
-
BP200UX 3kw + Expander Board
Balboa BP200UX 3kw which also includes the expander board, 59233
-
-
-
-
-
-
-
-
-
LX - WEE5
LX WEE5 circulation pump. An EXACT replacement for the Hotspring E5 and...
-
-
0.5hp Circ pump
Spanet circulation pump 350W (0.5hp) Circulation pump, 40mm unions inc...
-
-
3hp 2 speed
Spanet Smartflo Boost Pump 2200w (3.0hp) Two speed booster pump, 50mm...
-
2.5hp 2 speed
Spanet Smartflo Boost Pump 1850w (2.5hp) Two speed booster pump, 50mm...
-
2.5hp 1 speed
Spanet Smartflo Boost Pump 1850w (2.5hp) Single speed booster pump,...
-
1.5hp 2 speed
Spanet Smartflo Boost Pump 100w (1.5hp) Two speed booster pump, 50mm...
Waterway are by far the largest and well known manufacturer of hot tub associated plastics. We estimate that 90% of all spas manufactured use their components. This section contains all of the bodies from their Poly Storm jet family and these jet bodies require a hole in the spa shell of 2-5/8" (or 2-11/16" if using the grommet gasket)
Poly Storm There are 8 products.
-
-
-
Poly Storm Jet Body 1/2" S x 3/8" RB 212-0420
1/2" Socket Water x 3/8" RibbedBarb Air. (Supplied with flat gasket)
-
Poly Storm Jet Body 3/4" S x 3/8" RB 212-0410
3/4" Socket Water x 3/8" RibbedBarb Air. (Supplied with flat gasket)
-
Poly Storm Jet Body 3/4" x 3/8" 212-0400
3/4" Ribbed barb Water x 3/8" Ribbed barb Air. Discontinued. Use 212-0410
-
Poly Storm Jet Body Alignment Ring 218-4010
Alignment ring for ANY of the range of Poly Storm jet bodies.
-
Poly Storm Thread-In Jet Body, 3/4" x 3/8" 228-0438G
Waterway Poly Storm Thread-In jet body. The most common type of pipe connection. 3/4" water and 3/8" air. Supplied with lock ring and gasket. This is the GLO style of body that can also be used for LED lighting.
