No products
Prices are tax included
Waterway 2" Divertor valves
-
Electric
- Ozone
- Circulation Pumps
- Pumps, Motors & Parts
- PCB's Packs and Panels
- Lighting
- Sensors and Switches
- Electrical Sundries
- Speakers and Audio
- Heating
- LX
- Air
- Gear
-
Water
- Divertor Valves
- On/Off Valves
- Slice and Ball Valves
- Thermowells
- Unions
- Manifolds
- Floor Drains
- Suction
- Pipe
- Fittings
- Water Filtration
- Check Valves
- Water Features
- Drain valves
- Water Chlorination
- Pipe Clamps
- Gaskets and O Rings
-
Jets and Bodies
- Diffusers & Jets Pieces
- Water Jets
- Waterway Jet Bodies
- SCS Jet Bodies
- Waterway Jet Tools
- Hand-Held Jets
- Wellis
- CMP Products
- FILTERS
- Cycle Valves
- HotSpring-Caldera
New products
-
Hydroquip Low Flow System with K450 touchpad
The Hydroquip Low Flow System is built on Gecko YE5 circuitry utilising...
-
Sundance 850 2002 - 2004
Sundance 850 3 PUMP NT WITH CIRC/PERMAC (Picture for illustration only...
-
Aqua Flo Maelstrom 3hp two speed
Aqua Flo Maelstrom 3hp two speed 2" suction and discharge, exactly the...
-
-
4" CMP Directional Jet - Stainless and Graphite
4" CMP Directional jet, Stainless steel with a Graphite colour jet piece.
-
Hot-Springs Pillow
The Hot Spring Limelight Collection Pillow / Headrest fits the following...
-
Water Tank 2,000 litres
Collapsible water tank. Essential for hot tub servicing. 2metre...
-
-
Light lens and seal kit
Hotspring large light lens and seal kit. Front face diameter 135mm....
-
Hotspring Heater O ring gasket 2"
Hotspring heater o ring gaskets, sold in pairs. Hotspring part number...
-
-
-
-
-
-
-
Waterlab Chamber
Seamless under-the-spa inline integration No intrusive devices in your...
-
Gecko IN.TOUCH 3+ KIT
IN.TOUCH 3+ Kit includes: 2 communication transmitters: In.touch 3+...
-
Gecko IN.TOUCH-3 KIT
IN.TOUCH 3 Kit includes: 2 communication transmitters: In.touch 3 Spa...
Waterway 2" Divertor valves There are 9 products.
-
2" Divertor valve large o ring 805-0143
O ring that sits in the small channel of the divertor body underneath the cap. Common problems requiring the replacement of this o ring is leaking water around the divertor when the pumps are running. The temptation is to over-tighten the cap (ultimately breaking the cap). Over-tightening causes the o ring to flatten and to lose it's sealing properties...
-
-
-
-
-
Divertor valve small o ring 805-0113
Seats on the underside of the divertor top or the shaft of the divertor rotor. Fits both 1" and 2" divertors and there are x2 that sit on the square spline of the rotor.
