No products
Prices are tax included
DuraJet Pump Parts
-
Electric
- Ozone
- Circulation Pumps
- Pumps, Motors & Parts
-
PCB's Packs and Panels
- Balboa
- Pres Air
- Gecko
- Correct Tech
- Hydro Quip
- Sundance
- D1 Spas
- Joyonway by Balboa
- Master Spas
- Invensys
- ACC
- OEM
- Spanet
- Lighting
- Sensors and Switches
- Electrical Sundries
- Speakers and Audio
- Heating
- Harvia Sauna Heaters
- Superior Pool and Spa Centre
- LX
- Air
- Gear
-
Water
- Divertor Valves
- On/Off Valves
- Slice and Ball Valves
- Thermowells
- Unions
- Manifolds
- Floor Drains
- Suction
- Pipe
- Fittings
- Water Filtration
- Check Valves
- Water Features
- Drain valves
- Water Chlorination
- Pipe Clamps
- Gaskets and O Rings
-
Jets and Bodies
- Diffusers & Jets Pieces
- Water Jets
- Waterway Jet Bodies
- SCS Jet Bodies
- Waterway Jet Tools
- Hand-Held Jets
- Wellis
- CMP Products
- FILTERS
- Cycle Valves
- HotSpring-Caldera
New products
-
Balboa Clim8zone Heat Pump
Clim8zone – Intelligent Spa Water Heating & CoolingThe most...
-
-
-
BP200UX 3kw + Expander Board
Balboa BP200UX 3kw which also includes the expander board, 59233
-
-
-
-
-
-
-
-
-
LX - WEE5
LX WEE5 circulation pump. An EXACT replacement for the Hotspring E5 and...
-
-
0.5hp Circ pump
Spanet circulation pump 350W (0.5hp) Circulation pump, 40mm unions inc...
-
-
3hp 2 speed
Spanet Smartflo Boost Pump 2200w (3.0hp) Two speed booster pump, 50mm...
-
2.5hp 2 speed
Spanet Smartflo Boost Pump 1850w (2.5hp) Two speed booster pump, 50mm...
-
2.5hp 1 speed
Spanet Smartflo Boost Pump 1850w (2.5hp) Single speed booster pump,...
-
1.5hp 2 speed
Spanet Smartflo Boost Pump 100w (1.5hp) Two speed booster pump, 50mm...
Balboa Water Group Sta-Rite Durajet wet ends and parts.
DuraJet Pump Parts There are 11 products.
-
Pump wet end fitting, straight barbed 672-4350
Sometimes found screwed into the wet end of hot tub pumps and incorporated into a bleed system. They fit US manufactured pumps - Waterway Pumps, Aqua Flo Pumps, Balboa Pumps They do not fit - LX Pumps
-
Sta-rite Dura-jet Impellor : 2.5HP 17400-0123
The MOST common impellor in European Sta-rite pumps. Vane gap : 15mm Diameter : 90mm 17400-0123 imprinted on the rear of the impellor
-
Sta-rite Dura-jet Impellor : 2HP 17400-0122
The MOST common impellor in European Sta-rite pumps. 17400-0122 imprinted on the rear of the impellor
-
Sta-rite Dura-jet Impellor : 3.0HP 17400-0136
Vane gap : 15mm Diameter : 105mm 17400-0136 imprinted on the rear of the impellor.
-
-
Sta-rite Dura-jet volute o ring AO-231-O
Large o ring that sits between the front and rear parts of the wet end.
-
Sta-rite Dura-jet wet end 2hp 1215014
Balboa Sta-Rite wet end, 2 horsepower. Fits both 48 and 56 frame motors since the rear volute has double-position bolt mountings (see image)
-
Sta-rite Dura-jet wet end 3hp 1215015
Balboa Sta-Rite wet end, 3 horsepower. Fits both 48 and 56 frame motors since the rear volute has double-position bolt mountings (see image)
