No products
Prices are tax included
3kw M7 Heaters
-
Electric
- Ozone
- Circulation Pumps
- Pumps, Motors & Parts
- PCB's Packs and Panels
- Lighting
- Sensors and Switches
- Electrical Sundries
- Speakers and Audio
- Heating
- LX
- Air
- Gear
-
Water
- Divertor Valves
- On/Off Valves
- Slice and Ball Valves
- Thermowells
- Unions
- Manifolds
- Floor Drains
- Suction
- Pipe
- Fittings
- Water Filtration
- Check Valves
- Water Features
- Drain valves
- Water Chlorination
- Pipe Clamps
- Gaskets and O Rings
-
Jets and Bodies
- Diffusers & Jets Pieces
- Water Jets
- Waterway Jet Bodies
- SCS Jet Bodies
- Waterway Jet Tools
- Hand-Held Jets
- Wellis
- CMP Products
- FILTERS
- Cycle Valves
- HotSpring-Caldera
New products
-
Hydroquip Low Flow System with K450 touchpad
The Hydroquip Low Flow System is built on Gecko YE5 circuitry utilising...
-
Sundance 850 2002 - 2004
Sundance 850 3 PUMP NT WITH CIRC/PERMAC (Picture for illustration only...
-
Aqua Flo Maelstrom 3hp two speed
Aqua Flo Maelstrom 3hp two speed 2" suction and discharge, exactly the...
-
-
4" CMP Directional Jet - Stainless and Graphite
4" CMP Directional jet, Stainless steel with a Graphite colour jet piece.
-
Hot-Springs Pillow
The Hot Spring Limelight Collection Pillow / Headrest fits the following...
-
Water Tank 2,000 litres
Collapsible water tank. Essential for hot tub servicing. 2metre...
-
-
Light lens and seal kit
Hotspring large light lens and seal kit. Front face diameter 135mm....
-
Hotspring Heater O ring gasket 2"
Hotspring heater o ring gaskets, sold in pairs. Hotspring part number...
-
-
-
-
-
-
-
Waterlab Chamber
Seamless under-the-spa inline integration No intrusive devices in your...
-
Gecko IN.TOUCH 3+ KIT
IN.TOUCH 3+ Kit includes: 2 communication transmitters: In.touch 3+...
-
Gecko IN.TOUCH-3 KIT
IN.TOUCH 3 Kit includes: 2 communication transmitters: In.touch 3 Spa...
3kw M7 Heaters There are 6 products.
-
3kw M7 Heater (BP200 fit) 58450
Complete assembly including sensors and seals for Balboa BP200 plastic boxes. This 3kw heater ONLY fits BP200 systems. It does not fit GS or GL boxes. Save LOTS of money : Uses the 3kw Titanium element shown below in accessories. Scroll down.
-
3kw M7 Heater (BP200 Remote style) 58457
3kw heater that can be installed remotely to a Balboa BP200 spa pack. 15" long. Perfect match for BP200 systems.
-
3kw M7 Heater (Metal box fit) 58061 58122 58143 58215
Complete assembly including sensors and seals for Balboa metal boxes. Part number 58061, the same as 58122, 58143 and 58215 All 4 part numbers use the same style of heater, the 3kw metal box M7. If you heater has ANY of these 5 codes, this is the heater you need.
-
3kw M7 Heater (Plastic box fit) 58107 58118 58141 50079 58122
Complete assembly including sensors and seals for Balboa plastic boxes. Part number 58107, the same as 58118, 58141, 58122, 55626, 50079, 55626 and 58301. All 8 part numbers use the 3kw plastic box M7. If your heater has ANY of these 8 codes, this is what you need. There are other codes that feed back to this heater.
-
3kw M7 Heater (Remote style) 58351
3kw heater that can be installed remotely to a Balboa spa pack. 15" long, complete with x2 sensors, x2 heater gaskets and is pre-wired with the correct power cable and plug for Balboa systems. Perfect for GS100 systems that require a 15" heater (rather than the 10" that Balboa normally offer for GS100)
-
