No products
Prices are tax included
Y Series
-
Electric
- Ozone
- Circulation Pumps
- Pumps, Motors & Parts
-
PCB's Packs and Panels
- Balboa
- Pres Air
- Gecko
- Correct Tech
- Hydro Quip
- Sundance
- D1 Spas
- Joyonway by Balboa
- Master Spas
- Invensys
- ACC
- OEM
- Spanet
- Lighting
- Sensors and Switches
- Electrical Sundries
- Speakers and Audio
- Heating
- Harvia Sauna Heaters
- Superior Pool and Spa Centre
- LX
- Air
- Gear
-
Water
- Divertor Valves
- On/Off Valves
- Slice and Ball Valves
- Thermowells
- Unions
- Manifolds
- Floor Drains
- Suction
- Pipe
- Fittings
- Water Filtration
- Check Valves
- Water Features
- Drain valves
- Water Chlorination
- Pipe Clamps
- Gaskets and O Rings
-
Jets and Bodies
- Diffusers & Jets Pieces
- Water Jets
- Waterway Jet Bodies
- SCS Jet Bodies
- Waterway Jet Tools
- Hand-Held Jets
- Wellis
- CMP Products
- FILTERS
- Cycle Valves
- HotSpring-Caldera
New products
-
Balboa Clim8zone Heat Pump
Clim8zone – Intelligent Spa Water Heating & CoolingThe most...
-
-
-
BP200UX 3kw + Expander Board
Balboa BP200UX 3kw which also includes the expander board, 59233
-
-
-
-
-
-
-
-
-
LX - WEE5
LX WEE5 circulation pump. An EXACT replacement for the Hotspring E5 and...
-
-
0.5hp Circ pump
Spanet circulation pump 350W (0.5hp) Circulation pump, 40mm unions inc...
-
-
3hp 2 speed
Spanet Smartflo Boost Pump 2200w (3.0hp) Two speed booster pump, 50mm...
-
2.5hp 2 speed
Spanet Smartflo Boost Pump 1850w (2.5hp) Two speed booster pump, 50mm...
-
2.5hp 1 speed
Spanet Smartflo Boost Pump 1850w (2.5hp) Single speed booster pump,...
-
1.5hp 2 speed
Spanet Smartflo Boost Pump 100w (1.5hp) Two speed booster pump, 50mm...
Gecko Y Series packs. By far the MOST popular series of Gecko hardware.
YJ - (Entry level spa system)
YE - (The replacement for many spa systems)
YT - (Larger more complex system)
Y Series There are 6 products.
-
-
-
Gecko IN.YE5 V3 0610-221107-633
Brand New Designed YE series for 2022 Gecko YE5 Version 3 (Upto) 3 pumps + Circ pump/Ozonator Needs extension board 0610-100006 to run a Gecko heat pump. See below for configurations.
-
-
Gecko In.yt-8 with RS485 0611-221104-691
Gecko yt-8 with RS485 connection to operate Gecko heat pumps. 3kW heater 12V Light 8 configurable relays for pumps and accessories.
-
IN.YJ-3 0612-221040-430
IN.YJ-3 (Supersedes the IN.YJ-2) This will run : A Two-speed pump and a single speed pump (or) Circ pump (3 outputs) A Two-speed pump and a Blower (3 outputs) A Circ pump and x2 Single speed pumps (3 outputs) A Circ pump, a single speed pump and a Blower (3 outputs) Installation Guide CLICK HERE
