No products
Prices are tax included
List of products by supplier: Misc
-
-
Balboa Splitter Cable 25089 25801
Balboa spliter cable (Y Cable) for BP packs. There are 2 different parts numbers, both for the same part. 25089 and 25801 are the same thing. Allows for running x2 single speed pumps or a single speed pump and a blower. Used for options 30-32 on BP7 packs.
-
-
-
-
-
Balboa Value M7 PCB - Signature Spas fit 52858
This board has been discontinued by Balboa. Contact us for options.
-
-
-
-
Barb adaptor 1" SPG / 3/4" S x 1" RB 425-1010
Barb adaptor 1" Spiggot or 3/4" Socket x 1" RibbedBarb
-
-
-
Barb Adaptor 1-1/4" SPG / 1" S x 3/4" RB 672-4320
Barb Adaptor 1-1/4" Spiggot / 1" Socket x 3/4" RibbedBarb
-
Barb Adaptor 1/2" S / 3/4" SPG x 3/4" RB 425-1030
Barb Adaptor 1/2" Socket or 3/4" Spiggot x 3/4" RibbedBarb
-
-
-
-
Barb adaptor 3/8" B x N.P.S.M 413-1201
3/8" Barb x N.P.S.M Thread This is NOT generally the style fitted to hot tub pumps. For that, you would need a 672-4350.
-
Barb adaptor 90° elbow 1/2" SPG x 3/4" RB 411-3500
Barb adaptor 90° elbow 1/2" Spiggot x 3/4" RibbedBarb
-
-
-
Barb adaptor Tee 1" S x 1" S x 3/8" RB 413-4350
Barb adaptor Tee 1" Socket x 1" Socket x 3/8" RibbedBarb
-
-
Barb adaptor Tee 3/4" SB x 3/4" SB x 3/8" B 413-1850
Barb adaptor Tee 3/4" SmoothBarb x 3/4" SmoothBarb x 3/8" Barb
-
-
Basket - 220mm wide 519-9050
Item number 3 from the exploded diagram. 220mm x 180mm Only white or black now available.
-
Basket - 370mm wide 519-6610
Item number 6 in the exploded diagram. 370mm x 220mm Only black or grey available.
-
Bath Tub Floating Rubber Duck
Floating rubber duck (x1) for the bath or hot tub. Weighted to stay upright. From the largest US manufacturer of ducks !
-
-
BBA Heater - 3kw C2300-0137D
3kw Pres Air heater with 4ft of cable enabling remote install from the pack.
-
Bell Reducer 1-1/2" to 1" 421-4020
The 1-1/2" end of this Bell Reducer fits on the spiggot end of 1-1/2" plumbing and reduces down allowing the use of 1" fittings.
-
Bell Reducer 2" to 1-1/2" 421-5000
The 2" end of this Bell Reducer fits on the spiggot end of 2" plumbing and reduces down allowing the use of 1-1/2" fittings.
-
Bikini Floating Rubber Duck
Floating rubber duck (x1) for the bath or hot tub. Weighted to stay upright. From the largest US manufacturer of ducks !
-
-
-
Bleed valve o ring - Waterway 805-0111
For use with integrated bleed valve plumbing, like the 90degree fitting that has a bleed moulded into it. 413-2160 413-2180
-
Bleedline Fitting for Laing E5 Circ Pumps
Hotsprings fitting repair kit for the circulation pump. A very common part to break when working on or around the Heater and Circ pump. See pictures and read below
-
Blower - Max Air 1.5HP 2513220F-RFI
Max Air blower with 1.5hp motor The Max Air blower range is discontinued. The direct fitting replacement for this blower is the 1.5hp Ultra 9000, part number 3913220-A It is shown below in accessories.
-
Blower - Max Air 1HP 2510220F-RFI
Max Air blower with 1hp motor. The Max Air blower range is discontinued. There is no price, you cannot buy it. The replacement for this blower is the 1hp Ultra 9000, part number 3910220-A. It is shown below in accessories. Note - the mouth of the Ultra 9000 is wider.
-
Blower - Max Air 2HP 2518220F-RFI
The Max Air blower with 2hp motor has been discontinued by the manufacturer. The replacement for this blower is the 2hp Ultra 9000, part number 3918220-A. You must use a reducer since the mouth of the Ultra 9000 is 2", whereas the Max Air is 1-1/2". Contact us for advice. It is shown below in accessories.
-
Blower - Max Air, Heated 251022F-RFI-HEATER
Max Air blower, Heated with 1hp motor. The Max Air blower range is discontinued.
-
Blower - Ultra 9000 1.5HP
1.5hp Ultra 9000 spa blower Supplied with AMP cable which is the white plastic plug that plugs directly onto the circuit board. If you have a JJ cable (rubber plug) simply swap/use your existing cable.
-
Blower - Ultra 9000 1HP
Very common 1hp Ultra 9000 spa blower. Supplied with AMP cable which is the white plastic plug that plugs directly onto the circuit board. If you have a JJ cable (rubber plug) simply swap/use your existing cable.
-
Blower - Ultra 9000 2HP
2hp Ultra 9000 spa blower Supplied with AMP cable which is the white plastic plug that plugs directly onto the circuit board. If you have a JJ cable (rubber plug) simply swap/use your existing cable.
-
Blower recepticle cord 16-1113
Rubber Blower recepticle with cables. Fits onto the side of spa packs.
-
BOSS Pool and Spa Silicone - 3oz
BOSS Silicone products are used extensively in the USA pool and spa repair industry. Neutral Cure Silicone Adhesive Clear 3oz Squeeze Tube More info below -
-
BOSS Pool and Spa Silicone - Gun size
BOSS silicone products are used extensively in the USA pool and spa repair industry. Neutral Cure Silicone Adhesive Clear More info below -
-
Bottom Mount Lifter
Powder coated steel. Strong, foot assisted mechanism. Comparable to : Cover Mate II Additional brackets allow the weight of the spa to hold the lifter in position.
-
BP200UX 2kw
Replaces all BP200's Circ Pump: Yes Pump 1: 2speed Lights: Yes Ozone: Yes WiFi: Enabled Audio System: Enabled Ozone and light 2kw heater Works with TP panels. It can run an additional Blower or Second Pump by fitting an expander board, to be bought separately. Part number 59233. Shown below in accessories.
-
BP200UX 3kw
Replaces all BP200's Circ Pump: Yes Pump 1: 2speed Lights: Yes Ozone: Yes WiFi: Enabled Audio System: Enabled Ozone and light 3kw heater Works with TP panels. It can run an additional Blower or Second Pump by fitting an expander board, to be bought separately. Part number 59233. Shown below in accessories.
-
-
-
BP6013G1 (1p+b w/circ)
Balboa BP601G3 (Old part No 56610 - New 56611) Will run : 1) 2 speed pump One or a 1 speed pump One when using a separate circulation pump. 2) 1 speed pump Two or a Blower Ozone and light 3kw heater Works with TP panels.
-
BP6013G2 (3p/b w/circ)
Balboa BP601G3 (Old 56826-02 - New 56126) Will run : 3 massage pumps or 2 pumps and a blower Ozone and light 3kw heater Works with TP panels.
-
BP6013G3 (3p+b w/circ)
Balboa BP6013G3 - (3p+b w/circ) 59259 Will run : 3 x jet pumps - 2spd pump with/without circ pump or 1 spd pump with circ pump, 1 x jet pump 2 1 x jet pump 3 1 x blower Ozone and light 3kw heater Works with TP600, TP800, TP900 and Spa Touch. (Will not work with TP200, TP400 and TP500)
-
Bride Floating Rubber Duck
Floating rubber duck (x1) for the bath or hot tub. Weighted to stay upright. From the largest US manufacturer of ducks !
-
Bulkhead Wall Fitting 212-1820
3/4" Ribbed Barb water connection. Choose white or grey using the drop down.
-
-
-
-
Caldera and Hot-Spot Pillow
Caldera and Hot-Spot Pillow 2009+ Caldera Vacanza Series Spa Pillow. Caldera Vacanza Series Spas including the Palatino, Vanto and Marino
-
Caldera fit filter 73531 73531
Pleatco hot tub filter. Caldera part number 73531 For models : Niagra, Geneva, Tahitian, Hawaiin 2003 - CurrentElation and Aspire 2003 - 2004Hghland 2004 - CurrentMooreaC-45C-30 Click on pictures to view and scroll down to read full details.
-
Caldera fit filter 73722 73722
Pleatco hot tub filter. Caldera part number 73722 For models : Niagra Utopia 2005 - Current Geneva Utopia 2005 - Current Tahitian Utopia 2005 - Current Elation 2005 - Current Aspire 2005 - Current Cantabria 2014 (3rd Quarter) - Current Click on pictures to view and scroll down to read full details.
-
Caldera Pillow
Caldera Spa Pillow Gray/Silver Used On All Caldera Spas 2002 thru 2015. Used on the following models : Geneva, Niagra, Tahitian, Martinique, Kauai, Aspire, Elation
-
Caldera Pillow
Caldera spa pillow Used on all Caldera spas 2002-2015 9" x 6" Width between locator holes : 4-1/4"
-
-
-
-
Cap for 1" Air Control 662-2120
5 Scallop textured plastic style. Uses handle shown in accessories. Cap is discontinued.
-
-
-
-
Cap for 1" Divertor 602-4340
Notched style with smooth plastic. Uses the handle shown in accessories.
-
Cap for 1" Divertor 602-4430
5 Scallop style with textured plastic. Uses the handle shown in accessories.
-
Cap for 2" Divertor 602-3550
Notched style with smooth plastic. Uses the handle shown in accessories.
-
Cap for 2" Divertor 602-3590
5 Scallop style with textured plastic. Uses the handle shown in accessories. This part has been discontinued by Waterway, we only have stock on hand and you should contact us before making ANY purchases.
-
Cap for 2" Divertor 602-3530.
Scallop style with smooth plastic. Uses the handle shown in accessories.
-
Cap for 2" Divertor 6 spoke 602-3730
6 spoke style divertor top. 5" diameter. Only available in Grey and Black. White has been discontinued.
-
-
Chinese replacement Circ pump P1-42-1-BP
1 horsepower 1 speed pump. The best replacement for Chinese circ and main pumps that have only (around) a 2.8amp power consumption. All the benefits of fitting correctly with the superior quality of an Italian motor fitted to a USA wet end.
-
-
-
-
-
-
Cluster Storm (Adjustable) Jet Body 1/2" x... 212-1580G
1/2" Socket Water x 3/8" Ribbed barb Air. Supplied with Grommet gasket.
-
Cluster Storm (Adjustable) Jet Body 3/4"... 212-1720G
3/4" RibbedBarb Water x No Air. Supplied with Grommet gasket.
-
Cluster Storm (Adjustable) Jet Body 3/4" x... 212-1550G
3/4" Ribbed barb Water x 3/8" Ribbed barb Air. Supplied with Grommet gasket.
-
Cluster Storm (Adjustable) Jet Body 3/4" x... 212-1560G
3/4" Smooth barb Water x 3/8" Ribbed barb Air. Supplied with Grommet gasket.
-
Cluster Storm (Adjustable) Jet Body 3/4" x... 212-1570G
3/4" Socket Water x 3/8" Ribbed barb Air. Supplied with Grommet gasket.
