No products
Prices are tax included
List of products by supplier: Misc
-
Aqua Flo Impellor - 1hp Hi-Flo AF91693701
Impellor for Aqua Flo CMCP, CMHP, FMCP and FMHP wet ends. Rated at 1hp or Hi-Flo. Vane gap distance : 7mm
-
Aqua Flo Impellor - 3/4hp AF91693601
Impellor for Aqua Flo CMCP, CMHP, FMCP and FMHP wet ends. Rated at 3/4hp for the Standard Circmaster Vane gap distance : 5mm
-
Aqua Flo Maelstrom 2.5hp single speed 0800-290000
Aqua Flo Maelstrom 2.5hp single speed 2" suction and discharge, exactly the same as the XP2 and XP2e. The 2.5hp is a 48frame (80fr Europe) that runs at 10.3amps. For this reason it can easily be used to replace single speed pumps that are 48 (80) or 56 (90) frame.
-
Aqua Flo Maelstrom 2.5hp two speed 0800-290001
Aqua Flo Maelstrom 2.5hp two speed 2" suction and discharge, exactly the same as the XP2 and XP2e. The 2.5hp is a 56frame (90fr Europe) motor. 9.5amp and 2.9amp motor. A very powerful pump that covers all pump powers and speeds.
-
Aqua Flo Maelstrom 3hp two speed 0800-200001
Aqua Flo Maelstrom 3hp two speed 2" suction and discharge, exactly the same as the XP2 and XP2e. The 3hp is a 56frame (90fr Europe) motor. A great, powerful pump that covers all pump powers and speeds.
-
Aqua Flo XP2 wear ring AF92830070
Aqua Flo wear ring. The code : AF92830070 is stamped onto the wear ring (very small, but it is stamped)
-
Aqua Flo XP2 wet end for Circ Pump 91041611-120
Aqua Flo wet end specific to the XP2 Circ pump used on Emerson motors.
-
Aqua Flo XP2e 2.5hp wet end complete 6.3" AF91041925-000
56frame wet end. Complete with front and rear, impellor and seal. Centre to Centre bolt distance : 104mm
-
Aqua Flo XP2e 2hp wet end complete 6.1" AF91041624-000
56frame wet end. Complete with front and rear, impellor and seal. Centre to Centre bolt distance : 102mm
-
Aqua Flo XP2e 2hp wet end complete 6.3" AF91041920-000
56frame wet end. Complete with front and rear, impellor and seal. Centre to Centre bolt distance : 104mm
-
Aqua Flo XP2e 3hp wet end complete 6.3" AF91041930-000
56frame wet end. Complete with front and rear, impellor and seal. Centre to Centre bolt distance : 104mm
-
Aqua Flo XP2e 4hp wet end complete 6.3" AF91041940-000
56frame wet end. Complete with front and rear, impellor and seal. Centre to Centre bolt distance : 104mm
-
Aqua Flo XP2e impellor 1.5hp AF91695150
Aqua Flo XP2e impellor. Vane gap: 14mm Fits all variants of the XP2e wet end, whether it be 48frame or the two sizes of 56 frame - contact us if you are unsure
-
Aqua Flo XP2e impellor 2.5hp AF91695250
Aqua Flo XP2e impellor. Vane gap: 11mm Fits all variants of the XP2e wet end, whether it be 48frame or the two sizes of 56 frame - contact us if you are unsure
-
Aqua Flo XP2e impellor 2hp AF91695200
Aqua Flo XP2e impellor. Vane gap: 10mm Fits all variants of the XP2e wet end, whether it be 48frame or the two sizes of 56 frame - contact us if you are unsure
-
Aqua Flo XP2e impellor 3hp AF91695310
Aqua Flo XP2e impellor. Vane gap: 12mm Fits all variants of the XP2e wet end, whether it be 48frame or the two sizes of 56 frame - contact us if you are unsure
-
Aqua Flo XP2e impellor 4hp AF91695401
Aqua Flo XP2e impellor. Vane gap: 17mm Fits all variants of the XP2e wet end, whether it be 48frame or the two sizes of 56 frame - contact us if you are unsure
-
-
Arctic heater 3.6kw 90 degree A2360-5350ET / 48-9122-AT-K
The original Arctic heater is discontinued. The new heater that fits without any changes is shown. Uses the element shown below in accessories.
-
Arctic Heater 3.6kw curved A2360-5251ET 48-9124-AP-K
The original Arctic heater is discontinued. The replacement heater is pictured which uses fittings to overcome the curved design. The replacement heater is the first picture. All other pictures show the original heater. Uses the element shown below in accessories.
-
-
Arctic Spa Element 3.6kw
Heater element the Curved style heater for Arctic spas. To fit the heater shown in the second picture. The original element including the plate, cork gasket and o ring is no longer available. We sell the element only, that must be mounted (an easy task) onto your plate.
-
Armature Holding Tool PT-128
The perfect tool for unscrewing stuck-on pump impellors and best used with our impellor wedge.
-
Astrel U-Heater PFGMA0AR2000 26-C3480-1-7T-K
This Astrel heater is discontinued. There is a heater that fits and works in it's place. We will ship the alternative if you buy this product. 26-C3480-1-7T-K
-
-
Auxiliary control panel 4 button 51573
For GS and LE control systems only. THIS PANEL IS NOW OBSOLETE. (Feb 2015)
-
AX 20 No Overlay panel 52802
If the Top Level Panel is not right for you, choose this panel and the overlay to match the buttons you need.
-
-
-
-
AX 40 No Overlay panel 52799
If the Top Level Panel is not right for you, choose this panel and the overlay to match the buttons you need.
-
-
-
-
Baby Boy Floating Rubber Duck
Floating rubber duck (x1) for the bath or hot tub. Weighted to stay upright. From the largest US manufacturer of ducks !
-
Baby girl Floating Rubber Duck
Floating rubber duck (x1) for the bath or hot tub. Weighted to stay upright. From the largest US manufacturer of ducks !
-
Balboa 0.25hp circulation pump 1031030 and 1030025
Balboa circ pump. There are 2 part numbers for exactly the same pump. The fitments are identical. This particular pump uses the lower quality Chinese motor. We have chosen not to sell it and only offer the US motor version in the same category.
-
Balboa 1/15hp circulation pump 1030120
Balboa circ pump using the highest quality US Motors. These pumps should not be confused with other sellers offering only the Chinese pump Balboa part numbers for this pump 1030120, 1031030 and 1030025. 1-1/2" fittings. Take note of the motor with the electrical box on the side to be sure it does not clash with any parts in the pump location.
-
-
Balboa 2kw M7 Heater (Plastic box fit) 58115 58145 58432 55627
Complete assembly including sensors and seals for Balboa plastic boxes. Part number 58115, the same as 58145 and 58432 and 55627 Both part numbers use the same style of heater, the 2kw plastic box M7. If you heater has EITHER of these 2 codes, this is the heater you need.
-
-
-
Balboa circ pump wet end
Balboa circulation pump wet end to fit : 1031030, 1030025 and 1030120 pumps. A wet end is complete, with everything inside. Just bolt onto the motor
-
Balboa ControlMySpa™ 59304
The Balboa controlmyspa™ system and app connects to your hot tub on any smartphone or tablet. You can control the lights, temperature, setup schedules and it can push notify you and even your dealer, to notify of any problems. CLICK : CONTROLMYSPA™ DEDICATED WEBSITE
-
-
Balboa expander board mounting kit 53933
53933 consists of the screws and plastic standoffs used to mount a daughter board or expander board onto the metal bracket that also secures the heater tube inside several Balboa series spa packs. It does not come with the daughter or expander board.
-
Balboa Expander board X-P231 53681
X-P231 PN 53681 Expansion board used to add a 1-speed Pump output • Includes 30A fuse protection. • Can be found on Blue Whale Spas.
-
Balboa fit 58287 2kw heater
2006-Current. Hotspring Hot Spot and Caldera spas. Generally uses the square pressure switch shown below in accessories. Can also be found carrying a Balboa code 58287. See pictures fitted to a Hotspring Spa pack. Uses the pressure switch and hi limit shown below, in accessories
-
Balboa fuse - Light transformer 1/2amp 20597
This fuse has been discontinued by Balboa. We have an alternative fuse, but it does not have the "tails" so, some extra soldering will be required.
-
Balboa GL8000 M3 PCB 53860 52888 56239 53500 53255
Balboa GL8000 circuit boards. For any of these numbers on your circuit boards, 53860 52888 56239 53500 53255 53858 Discontinued - contact us for options.
-
Balboa GS501Z PCB 3kw 54512
GS501Z circuit boards. 54512 53341 53956 53556 54189 56240 54296 55661 53955 55447
-
Balboa HPGL2K2P PCB. 54331
Hydropool fit generic Balboa board. Contact us before buying as there are software changes that are different to the original, very easily explained. Pack code 54330
-
-
Balboa Logic Jumper on a Stick 70003
Pressure switch calibration tool. Allows for the easy connection of the pressure switch cable from the circuit board onto a voltmeter.
-
-
-
Balboa M7 sensor - 12" long - PAIR 53605 30344
M7 sensor for plastic packs. 12" cable. Sold as pairs. You should always replace both sensors at the same time. Best price in the UK and Europe. Complete with o ring and black plastic mount, as pictured.
-
Balboa M7 sensor - 24" long - PAIR 32016
M7 sensor for Metal packs, 24" long. Sold as pairs. You should always replace both sensors at the same time. Best price in the UK and Europe. Complete with o ring and black plastic mount, as pictured.
-
Balboa M7 sensor - 36" long 25283
M7 sensor. 36" cable. Sold individually. (Rare sensor - please check the length and part number of yours first)
-
-
-
Balboa PLUG N' CLICK heater cable 25696
New style heater cable found on 2016 Balboa spa packs. Part number printed on the cable. Used on GS and GL systems along with a 25263 (Not used on BP systems) Balboa recommend the use of Nyogel 760G with these cables.
-
Balboa PLUG N' CLICK heater cable 25263
New style heater cable found on 2016 Balboa spa packs. Used on GS GL and BP systems and heaters. BP use this single cable. GS and GL use this cable along with the 25696 Balboa recommend the use of Nyogel 760G with these cables.
-
Balboa sensor mount 30388
Thru-Wall sensor mount for 3/8" bullet sensors. May be supplied clear (as shown) or black.
-
Balboa Spaform SF100 - 2 pump + Blower 51900
Board is discontinued. Contact us for advice if you need this board as you can still swap the system to keep the spa working.
-
-
Balboa Splitter Cable 25089 25801
Balboa spliter cable (Y Cable) for BP packs. There are 2 different parts numbers, both for the same part. 25089 and 25801 are the same thing. Allows for running x2 single speed pumps or a single speed pump and a blower. Used for options 30-32 on BP7 packs.
-
-
-
-
-
Balboa Value M7 PCB - Signature Spas fit 52858
This board has been discontinued by Balboa. Contact us for options.
-
