No products
Prices are tax included
Top sellers
-
-
StormForce 7 WET END
A complete Wet end for the Storm Force 7 which includes the main housing, seals Impellor and everything. Just bolt on. If your pump is leaking from the back of the wet end you might only need this wet end.
-
Waterway Air Injector - 1" Spg or 3/4" Soc 670-2190
1" Spigot or 3/4" Socket. Adaptor style. Stainless steel.
-
-
3" Heater Uni-Nut
Heater union nut for Saratoga and Low Flow heaters only. Will only fit heaters in the additional pictures. THIS IS NOT A SPLIT NUT. THIS IS NOT A STANDARD NUT AND WILL ONLY FIT THE HEATERS SHOWN - LOOK BEFORE YOU BUY. IT HAS A 4" DIAMETER BUT IS KNOWN AS A 3" NUT.
-
-
Hot tub pump capacitor 8uF CAP8.
Capacitor for hot tub motors. Specific size for EMG motors by Waterway and Aqua Flo and is supplied with flying leads and ring terminals. Can fit many other pumps, dimensions are shown below. This capacitor has been discontinued because it is no longer used by EMG. If the size is ok, use a 10uF
-
-
2kw M7 Heater (Remote style) 58350
2kw heater that can be installed remotely to a Balboa spa pack. 15" long, complete with x2 sensors, x2 heater gaskets and is pre-wired with the correct power cable and plug for Balboa systems. Perfect for GS100 systems that require a 15" heater (rather than the 10" that Balboa normally offer for GS100)
-
Waterway pump union 1" 400-1990
Pump union with a 1" socket end. Traditionally used with the Red Waterway Tiny Might circulation pump pictured.
-
-
-
Thead-In 3-3/8" diameter, 5 scallop grey... 229-8057
Thead-In 3-3/8" diameter, 5 scallop grey directional
-
-
Hydraulic Lifter - Cover Valet
Cover Valet brand hydraulic lifter. Choose the size according to your spa using the drop down box.
-
Cluster Storm (Adjustable) Jet Body 3/4"... 212-1720G
3/4" RibbedBarb Water x No Air. Supplied with Grommet gasket.
-
-
-
Praher bolt and locknut set for 2" gate... 4-60-PR200-G1/G6(x4x4)
Set of nuts and bolts for Praher gate valves. Comprises : x4 nuts and x4 bolts
-
3kw Flow Thru - Saratoga Spa heater E2300-0542ET
The original heater is discontinued. There is new a heater that fits. Search for 27-V310-2T-K
-
-
-
-
-
-
-
-
Heater Tailpiece - 90degree x 3/4"
For Low Flow and Saratoga heaters only. Diameter = 3-5/8" Barb accepts 3/4" water pipe.
-
4hp Executive Euro 56Frame, 2" suction P4-56-2-EX2
Waterway Twin speed 4hp pump with a standard 2" suction.
-
152 x 205 - Spa Components SC-WW50P3... SC-WW50P3
Spa Components SC-WW50P3 hot tub filter. We've cross-referenced the 5 filter manufacturers to help you identify if you already have a code from a previous purchase. Pleatco PWW50P3 Unicel 6CH-940 Darlly 60401 & SC714 Filbur FC-0359 Magnum WY45 Blue Whale SS06 Chill Tubs FLT-ZX205-0001 Click on pictures to view and scroll down to read full details.
-
-
-
Bulkhead Wall Fitting 212-1820
3/4" Ribbed Barb water connection. Choose white or grey using the drop down.
-
-
-
Pipe Lagging and Tape
Foil faced pipe lagging. 1.2 metre lengths. Choose 3/4", 1-1/2" or 2" 25mm wall thickness. Cut to fit, peel off the tape and stick down to seal the lagging providing a neat, professional fit. Rolls of tape are 50mm wide and 45 metres long. We cannot ship this to Europe.
-
Thead-In 3-3/8" diameter, 5 scallop grey roto 229-8017
Thead-In 3-3/8" diameter, 5 scallop grey roto
-
2" insider coupler 0302-20
Flexi pipe joiner for 2" flexible pipe This will NOT work by trying to connect 2" plastic fittings together OR rigid pipe. You can only use it with joining 2" flexible pipe to 2" rigid pipe.
-
Rotary Jet - Grey
Grey colour replacement rotary jet for all 1997-Current Hot Springs & Tiger River spas, all 1997-2002 Hot Spot and all 2003-current Solana spa models. This jet has been redesigned from the "push in style" to a "screw in style" shown.
-
Sta-rite Dura-jet wet end 2hp 1215014
Balboa Sta-Rite wet end, 2 horsepower. Fits both 48 and 56 frame motors since the rear volute has double-position bolt mountings (see image)
-
-
-
Knob Cap for 2" On/Off Valve 602-4540
Diameter : 3-5/8" Now discontinued. We have 2 left in stock, in White. (July 2024)
-
Balboa Logic Jumper on a Stick 70003
Pressure switch calibration tool. Allows for the easy connection of the pressure switch cable from the circuit board onto a voltmeter.
-
Hot tub pump capacitor 50uF CAP50.
Capacitor for hot tub motors. Specific size for EMG motors by Waterway and Aqua Flo and is supplied with flying leads and ring terminals. Can fit many other pumps, dimensions are shown below.
-
Tiny Might circulation pump - RED motor screw 3312620-1472
Common screw union style. Original RED motor style
-
-
-
Rambit 1" Tools
Ram Bit - Removes plastic pipe from 1" plastic fittings, leaves fitting clean & ready for glue. Power drill required.
-
ACC Dual sensor assembly
ACC dual sensor probe 12" long For all ACC systems. There is one bullet sensor and two plugs. It is NOT discontinued like other websites would have you believe. We have plenty in stock and continuously re-stock.
-
-
1-1/2" Slice Valve Spg x Spg 880-1510
Waterway Plastics - Sealed shut off valve. 1-1/2" spiggot x spiggot
-
Balboa sensor mount 30388
Thru-Wall sensor mount for 3/8" bullet sensors. May be supplied clear (as shown) or black.
-
Control Head 73225
Usually found fitted to 2001-2009 spas. Sits behind the touchpad and connects to the control box circuit board by a computer-style ribbon. See pictures. Plug width 15mm 38912 is on the sticker.
-
-
Waterway Air Control - Toggle Style (Long... 650-1017
Waterway air control with minimal moving parts. On/Off rocking toggle switch to switch air on and off. White is Discontinued.
-
GL2001 Mach3 55216
Balboa have discontinued this pack - Contact us for options. This system can operate : Pump 1: 1 or 2 speed (plus circ pump, if required)Pump 2: 1 or 2 speedPump 3: 1 speed or blowerExtra Port: Available for a pump or blower if pump 2 single speed The 55216 is the new part number for the older version 53883.
-
-
Waterway trim ring - Diameter 200mm 519-8050
Item number 2 in the exploded diagram. Diameter : 200mm HIGH Volume
-
Waterway wet end face plate screw 819-1110
Screw for Waterway wet ends. Screws through the front face and onto the rear of the wet end.
-
Thermostat Thermistor (Pre 2002) Coarse thread
For spas pre 2002. Uses the board connector as pictured.
-
VL 701S Overlay 10430
Buttons : Blower (blank) Mode [display] Warm - Jets1 Jets2 Light [display] Cool
-
-
2.7kw Laing heater C3236-2A
LA Spas fit. Runs at 11.3amps This heater is no longer available. You can still buy. We will ship you the 4kw version (C3236-1A) which IS available. Exactly the same fit.
-
Solvent cement Gap Filling Glue 250ml UNI100-250
A heavy based glue for joining pipes, sleeves and fittings with press and loose fit, gap filling properties. This is a different type of pipe glue. It will help with loose fitting pipes. There is no need to use this pipe for general pipe repairs where you are fitting new pieces of plastic or pipe. We cannot ship glue products into Europe, sorry.
-
-
127 x 330 - Pleatco PWW50L Unicel 4CH-949...
Pleatco PWW50L hot tub filter. Pleatco make the best spa filters you can buy. We've cross-referenced the 5 filter manufacturers to help you identify if you already have a code from a previous purchase. Pleatco PWW50L Unicel 4CH-949 Darlly 40508 & SC757 Filbur FC-0172 Magnum O250 0250 Click on pictures to view and scroll down to read full details.
-
Hot Tub Pump Capacitor 25uF Cap25-Spades
Hot tub motor capacitor dimensions (not including the small bolt that can be cut off if required) Length : 93mm Diameter : 40mm Generic image representation of the exact style.
-
-
-
Aqua Flo XP2e 3hp wet end complete 6.1" AF91041951-000
56frame wet end. Complete with front and rear, impellor and seal. Centre to Centre bolt distance : 102mm
-
-
-
Wet End: 2" Executive Euro 48f (2hp impellor) 310-1890
48frame - 2hp impellor This part has been discontinued by Waterway, we have now sold out. Please contact us for alternative options.
-
2" Poly Planar Round Speaker NLA
DISCONTINUED BY THE MANUFACTURER (Unavailable to buy - sold out) 2" Poly Planar speakers. (Actual front grille diameter is 3.6" or 92mm)
-
-
-
Waterway Standard Poly Neck Jet 212-7027 212-7029-STS
Waterway have discontinued Grey. The jets are now available in a light colour Grey. (Our historic picture is original grey, you will receive a light grey.)
-
-
CMCP wet end - Centre discharge 1hp AF91040840
Circulation pump complete wet end. Even though it is rated at 1hp, it is the correct wet end for Aqua Flo circ pumps.
