Item 2a in the exploded diagram. Does not include flap, hinge mounts or screws which muct be bought separately. Now only available in dark silver glitter, which is almost black. (Of course image shows grey)
Item number 1 from the exploded diagram. 265mm x 265mm Grey is no longer available - we have 2 left in stock. (21/11/25)
Item 1a in the exploded diagram. Does not include flap, hinge mounts or screws which muct be bought separately.
The MOST common impellor used in European Waterway pumps. The same impellor is used in 48 and 56 frame wet ends.
Any of these impellor codes are no longer available, we send an alternative replacement from Waterway which although looking different fits and works as an exact replacement. You cannot buy the 310-4300 or 313-2410. They are no longer made. You can use the 310-4180 and this is what we will ship.
Waterway Circulation pump offering greater power, at 1hp, than the usual 1/8hp which is the norm for this style of circ pump.
1" socket intake. Stainless Steel front. Two sizes available using the drop down box.
3/4" socket intake. 6" wide water blade (where the water comes out)
1" socket intake. 8" wide water blade (where the water comes out)
3/4" Socker Water x No Air. (Not supplied with a gasket - choose one shown in accessories below)
3/4" Barbed Water (with air check valve) x No Air. (Not supplied with a gasket - chose one shown in accessories below)
3/4" Socket Water (without air check valve) x 3/8" Ribbed barb Air. (Not supplied with a gasket - choose one shown in accessories below)
1/2" Socket Water x 3/8" Ribbed barb Air. (Not supplied with a gasket - choose one shown below in accessories)
3/4" Smooth barb Water x 3/8" Smooth barb Air. (Not supplied with a gasket - choose one shown below in accessories)
3/4" Ribbed Barb Water x 3/8" Ribbed Barb Air. (Not supplied with a gasket - choose one shown below in accessories)
Coupler 3/4" SB to 3/4" SB. Used to join 3/4" ID white or clear flexi pipe. Sold individually.
"T" Body 1" Water x 1" Air. (Not supplied with either a gasket or wall fitting - choose these shown below in accessories)
1/2" Socket Water x 3/8" Ribbed Barb Air. (Not supplied with a gasket - choose one shown below in accessories)
3/4" Smooth barb Water x 3/8" Smooth barb Air. (Not supplies with a gasket - choose one shown below in accessories)
Screw in wall fitting, for thick walled installations like wooden/barrel spas.
Simply remove ANY Waterway Poly Storm Jet from your hot tub, fit the hand held jet into place and enjoy localised and therapeutic water massage.
3/4" Ribbed barb Water x 3/8" Ribbed barb Air. Discontinued. Use 212-0410
Simply remove ANY 5" Waterway Power Storm Jet from your hot tub, fit the hand held jet into place and enjoy localised and therapeutic water massage.
1/2" socket Water x 3/8" Ribbed barb Air. (Supplied with flat gasket)
3/4" Ribbed barb Water x 3/8" Ribbed barb Air. (Supplied with flat gasket)
Vibration stopping mounts for 48frame pumps. Sold in pairs
Vibration stopping mounts for 56frame pumps. Sold in pairs
Two part seal kit for the Waterway Tiny Might circ pump. Does not fit any other pumps.
Everything you need to fit x16 waterline lights and a main LED. No extra boxes or special switches, everything runs off the new bulb fitted to the light housing in the tub. Works really well with no fuss.
Discontinued. The directional style is still available, 210-6040
Used ONLY in Waterway 180° shut off valves. It has a small rubber piece on the stem which makes it different to a diverter rotor. Therefore, DO NOT confuse this part with a divertor rotor.
Common screw union style. Red pump is for common identification - we ship the European waterway pump with the silver motor.
Common screw union style. Original RED motor style
Item number 4 from the exploded diagram. 195mm x 185mm Grey is no longer available, Waterway can provide light grey.
Hot tub water manifold with 3/4" socket ports
Hot tub water manifold with 3/4" socket ports
2" water manifold (SOC x SOC) with x2 1/2" socket ports
2" water manifold (SOC x SOC) with x4 1/2" socket ports
2" water manifold (SOC x SPG) with x4 3/4" socket ports
2" water manifold with 3/4" ribbed barbs and dead end
2" water manifold with 3/4" ribbed barbs and dead end