No products
Prices are tax included
List of products by supplier: Misc
-
-
-
-
-
-
-
-
-
-
-
-
Waterway Ozone Jet 212-1837
Spa injector, common to Spaform. Hole size : 1-1/4" (30mm) 3/4" barb pipe fitting.
-
-
Waterway Poly Jet Large Face, Textured... 210-6730
These jets have been discontinued by Waterway. You can also use jets 210-6720 and 210-6727
-
-
Waterway Poly Storm Diffusers 218-4000
Broken Waterway Jets? Replace only the rear piece and save money.
-
Waterway Poly Storm, Smooth plastic,... 212-8040
Waterway discontinued this style of jet in 2018. We are only displaying jet styles and colours where we still have some stock. If you cannot find your exact jet, you still have the option of keeping your existing jet face and just replacing the diffuser (the white rear piece) If this is still not possible for you, you must replace the jet body and jet to...
-
Waterway Poly Storm, Smooth plastic, Massage 212-8020
Waterway discontinued this style of jet in 2018. We are only displaying jet styles and colours where we still have some stock. If you cannot find your exact jet, you still have the option of keeping your existing jet face and just replacing the diffuser (the white rear piece) If this is still not possible for you, you must replace the jet body and jet to...
-
Waterway Poly Storm, Textured plastic,... 212-8010
Waterway discontinued this style of jet in 2018. We are only displaying jet styles and colours where we still have some stock. If you cannot find your exact jet, you still have the option of keeping your existing jet face and just replacing the diffuser (the white rear piece) If this is still not possible for you, you must replace the jet body and jet to...
-
-
Waterway Pop Up Water Feature 675-0791L
Grey has been discontinued. The only available choice is now a clear jet, see the second picture. Everything else remains the same with fitting sizes etc.
-
Waterway Power Storm Diffusers 218-6610
Broken Waterway Jets? Replace only the rear piece and save money.
-
Waterway Power Storm Diffusers - Thread-In
THREAD-IN DIFFUSERS. Broken Waterway Jets? Replace only the rear piece and save money. SALES NOTE : These are for the New Style of Thread-In style of Waterway jet - See picture
-
Waterway Power Storm Jet Nozzle 12gpm 217-6600
Fits inside all Power Storm jets, except for clear LED Jets.
-
Waterway Power Storm jet orifice 218-6620
Fitted (loosely) into the rear of Waterway Power Storm jets to channel the water through the jet.
-
Waterway Power Storm, Stainless, Massage 212-7367S
Power Storm 5-1/2" Diamater. Stainless Steel Massage jet.
-
Waterway Power Storm, Stainless, Massage 212-7747S
This is the 5" diameter Power Storm jet in grey and stainless. It is discontinued. We have the 5-1/2" version. If your spa can accommodate this diameter, buy this product and we will send you the 5-1/2"
-
-
Waterway Pump Trap 2" x 2" 310-6600
Waterway pump trap assembly. 2" inlet and connects to any Waterway pump using a 2" suction wet end. The best pumps to use with this product are shown below in accessories.
-
Waterway pump union 1" 400-1940
Pump union with a 3/4" barb end. Traditionally used with the Red Waterway Tiny Might circulation pump pictured.
-
Waterway pump union 1" 400-1990
Pump union with a 1" socket end. Traditionally used with the Red Waterway Tiny Might circulation pump pictured.
-
Waterway Pump Union Gasket 2" (pair) 711-4010(x2)
Pump seal to fit 2" unions - flat type. Because this is a flat seal on both sides it will work with ALL 2" pump unions. Sold in pairs Gaskets are always measured by the internal diameter size of the pipe the fitting is connected to - really confusing when nothing measures what it says. To help, the outside diameter of these is 3" Every hot tub part is...
-
Waterway Pump Union Gasket 2" 1/4" thick 711-4020(x2)
Pump seal to fit 2" unions - flat type. This gasket is 1/4" thick. Sold in pairs Gaskets are always measured by the internal diameter size of the pipe the fitting is connected to - really confusing when nothing measures what it says. To help, the outside diameter of these is 3" Every hot tub part is measured in inches.
-
Waterway Quad Flo Swim jet 212-4510
Discontinued - Only available stock on hand. Check with us first as we have very limited numbers.
-
Waterway Rip Current Swim Jet 210-5168S-DSG
2-1/2" slip x 1" spiggot Stainless Rip Current Swim Jet Supersedes the older version Swim Jet
-
Waterway Single speed 3.5hp VIPER pump P3.5-56-1-V2.5
3.5hp single speed 12.4 amp motor. The most powerful single speed Waterway pump. Waterway produce two pumps for the European market. They use special 2-1/2" suction and 2-1/2" discharge Viper wet ends. These pumps are not to be confused with hot tub pumps.
-
Waterway Spacer Ring 711-1010
Filter spacer ring found at the bottom (under the filter) of many Waterway filters. (See diagrams)
-
-
Waterway Standard Poly Neck Jet 212-7027 212-7029-STS
Waterway have discontinued Grey. The jets are now available in a light colour Grey. (Our historic picture is original grey, you will receive a light grey.)
-
Waterway Super Flo NLA
This wet end along with any associated parts are longer available from Waterway. It can be identified as have 4 cut corners on the front face - see picture. The replacement would be the Super Hi Flo as shown below in "accessories" If you have a (pretty rare) 2-1/2" Super Flo, the replacement would be the Executive Euro shown below in "accessories"
-
Waterway Super Hi-Flo 200GPM Suction 640-3850
Suction with 2" pipe socket fitting Discontinued. SOLD OUT
-
-
-
-
-
Waterway Tailpiece, 2in. Buttress x 2 SPG... 413-2160
Waterway 413-2160 Tailpiece, 2in. Buttress x 2 SPG with 1-1/2Fpt
-
-
Waterway trim ring - Diameter 200mm 519-8070
Item number 1 in the exploded diagram. Diameter : 200mm LOW Volume
-
Waterway trim ring - Diameter 200mm 519-8050
Item number 2 in the exploded diagram. Diameter : 200mm HIGH Volume
-
Waterway Ultra Skim - lid 519-8169-DSG
Item number 1 from the exploded diagram. Only available in dark silver glitter.
-
-
-
-
Waterway wet end face plate screw 819-1110
Screw for Waterway wet ends. Screws through the front face and onto the rear of the wet end.
-
Waterway Whirlpool Diffusers 218-1600
Broken Waterway Jets? Replace only the rear piece and save money.
-
-
-
-
Weir door assembly 550-6607
Item number 11 in the exploded diagram 355mm x 133mm Has 519-6600 imprinted into the plastic. Only available in Grey.
-
-
Weir door assembly - 130mm wide 519-4050
Item number 1 (door) and 2 (foam) from the exploded diagram. Height 120mm Width 130mm The door is 519-XXXX Available in white, grey or black.
-
-
-
-
Wet end bolts - 48 Frame 48 bolts (x4)
Pack of x4 bolts for 48 frame wet ends, commonly used on EMG motors. They will fit Waterway and Aqua Flo 48 frame wet ends.
-
Wet end bolts - 56 Frame 56 bolts (x4)
Pack of x4 bolts for 56 frame wet ends, commonly used on EMG motors. They will fit Waterway and Aqua Flo 56 frame wet ends.
-
Wet End: 1.5hp Niagara (Ultimax) 1215160
1.5hp Niagara (Ultimax) wet end. If you need a complete pump, contact us as we build pumps based on horsepower and motor frame size.
-
Wet End: 1hp Niagara (Ultimax) 1215021
1hp Niagara (Ultimax) wet end. If you need a complete pump, contact us as we build pumps based on horsepower and motor frame size.
-
Wet End: 2" Executive Euro 48f (2hp impellor) 310-1890
48frame - 2hp impellor This part has been discontinued by Waterway, we have now sold out. Please contact us for alternative options.
-
-
-
Wet End: 2hp Niagara (Ultimax) 1215011
2hp Niagara (Ultimax) wet end. If you need a complete pump, contact us as we build pumps based on horsepower and motor frame size.
-
Wet End: 3hp Niagara (Ultimax) 1215012
3hp Niagara (Ultimax) wet end. If you need a complete pump, contact us as we build pumps based on horsepower and motor frame size.
-
Wet End: 3hp Vico Ultrajet (Ultima) 1215145
The most common Vico wet end in Europe. Fitted to hundreds of Hydropool and Canadian Spa hot tubs.
