No products
Prices are tax included
Sensors
- Air
-
Electric
- Circulation Pumps
- Electrical Sundries
- Heating
- Lighting
- Ozone
-
PCB's Packs and Panels
- Balboa
- Correct Tech
- Gecko
- Hydro Quip
- Pres Air
- Sundance
- Waterway
- ACC
- OEM
- D1 Spas
- Master Spas
- Joyonway by Balboa
- Invensys
- Pumps, Motors & Parts
- Sensors and Switches
- Speakers and Audio
- Special order
- Gear
-
Water
-
Jets and Bodies
- Diffusers & Jets Pieces
- Hand-Held Jets
- SCS Jet Bodies
- Water Jets
- Waterway Jet Bodies
- Waterway Jet Tools
- CMP Products
- Wellis
- FILTERS
- Fittings
- Pipe
- Slice and Ball Valves
- Manifolds
- Unions
- Gaskets and O Rings
- Divertor Valves
- On/Off Valves
- Drain valves
- Check Valves
- Floor Drains
- Pipe Clamps
- Suction
- Thermowells
- Water Chlorination
- Water Features
- Water Filtration
- Cycle Valves
-
Jets and Bodies
- HotSpring-Caldera
This section represents the most common sensors and parts requested.
Every part can be identifiable with a simple comparison of a photograph and the details of the dates at which they have been used on the manufacture of spas.
If you are unsure, call us on the number at the top of the website.
Sensors There are 10 products.
-
£53.48 -
£68.96 -
£28.77Hi Limit Thermistor (Post 2002) Fine thread
For spas post 2002. Uses the 2 position white board connector with a red and black cable in each pin location. Uses the board connector as pictured. Supplied with O ring
£28.77 -
£36.91Hi Limit Thermistor (Pre 2002) Fine thread
For spas pre 2002. Uses the board connector as pictured.
£36.91 -
£5.25 -
£57.23 -
Hotspring Caldera Watkins Pressure Switch Kit
Manufactured by Hydroquip for their triple bend heaters. Also fits the original Hotspring 1.5kw heater. The original switch is square (2nd photo), this is round and fits and works in exactly the same way. Supplied with new cables. The short cable for Hot Spot and the long cable for IQ2020 Hotspring and Caldera heaters. July 2024 - we are the first company...
£44.75 -
£28.77Thermostat Control Thermistor (Post 2002) Coarse thread
For spas post 2002. Uses the 4 position white board connector with a red and black cable in pin locations 1 and 4. Uses the board connector as pictured. Supplied with O ring
£28.77 -
£36.91Thermostat Thermistor (Pre 2002) Coarse thread
For spas pre 2002. Uses the board connector as pictured.
£36.91 -
£5.25
