No products
Prices are tax included
3kw M7 Heaters
-
Electric
- Circulation Pumps
- Electrical Sundries
- Heating
- Lighting
- Ozone
- PCB's Packs and Panels
- Pumps, Motors & Parts
- Sensors and Switches
- Speakers and Audio
- Air
- LX
- Gear
-
Water
-
Jets and Bodies
- Diffusers & Jets Pieces
- Hand-Held Jets
- SCS Jet Bodies
- Water Jets
- Waterway Jet Bodies
- Waterway Jet Tools
- CMP Products
- Wellis
- FILTERS
- Fittings
- Pipe
- Slice and Ball Valves
- Manifolds
- Unions
- Gaskets and O Rings
- Divertor Valves
- On/Off Valves
- Drain valves
- Check Valves
- Floor Drains
- Pipe Clamps
- Suction
- Thermowells
- Water Chlorination
- Water Features
- Water Filtration
- Cycle Valves
-
Jets and Bodies
- HotSpring-Caldera
3kw M7 Heaters There are 7 products.
-
£170.753kw M7 Heater (BP200 fit) 58450
Complete assembly including sensors and seals for Balboa BP200 plastic boxes. This 3kw heater ONLY fits BP200 systems. It does not fit GS or GL boxes. Save LOTS of money : Uses the 3kw Titanium element shown below in accessories. Scroll down.
£170.75 -
£215.493kw M7 Heater (BP200 Remote style) 58457
3kw heater that can be installed remotely to a Balboa BP200 spa pack. 15" long. Perfect match for BP200 systems.
£215.49 -
£135.003kw M7 Heater (Metal box fit) 58061 58122 58143 58215
Complete assembly including sensors and seals for Balboa metal boxes. Part number 58061, the same as 58122, 58143 and 58215 All 4 part numbers use the same style of heater, the 3kw metal box M7. If you heater has ANY of these 5 codes, this is the heater you need.
£135.00 -
£135.003kw M7 Heater (Plastic box fit) 58107 58118 58141 50079 58122
Complete assembly including sensors and seals for Balboa plastic boxes. Part number 58107, the same as 58118, 58141, 58122, 55626, 50079, 55626 and 58301. All 8 part numbers use the 3kw plastic box M7. If your heater has ANY of these 8 codes, this is what you need. There are other codes that feed back to this heater. We also stock another, less expensive...
£135.00 -
£259.883kw M7 Heater (Remote style) 58351
3kw heater that can be installed remotely to a Balboa spa pack. 15" long, complete with x2 sensors, x2 heater gaskets and is pre-wired with the correct power cable and plug for Balboa systems. Perfect for GS100 systems that require a 15" heater (rather than the 10" that Balboa normally offer for GS100)
£259.88 -
£142.383kw M7 Heater Plug n’ Click 58301
Complete assembly including sensors, Plug n’ Click cable and seals for Balboa systems. This heater is used on the Balboa spa packs. It is 3kw. The heater comes attached with the Plug n’ Click cable that simply connects to the existing cable from the circuit board of your hot tub.
£142.38 -
£140.00