This section represents the most common sensors and parts requested.
Every part can be identifiable with a simple comparison of a photograph and the details of the dates at which they have been used on the manufacture of spas.
If you are unsure, call us on the number at the top of the website.
For spas post 2002. Uses the 2 position white board connector with a red and black cable in each pin location. Uses the board connector as pictured. Supplied with O ring
For spas pre 2002. Uses the board connector as pictured.
Manufactured by Hydroquip for their triple bend heaters. Switch and 2 cables. The original switch is square (2nd photo), this is round and fits and works in exactly the same way. The short cable for Hot Spot and the long cable for IQ2020 Hotspring and Caldera heaters. July 2024 - we are the first company in Europe to stock this switch.
For spas post 2002. Uses the 4 position white board connector with a red and black cable in pin locations 1 and 4. Uses the board connector as pictured. Supplied with O ring
For spas pre 2002. Uses the board connector as pictured.