Sold in pairs
3/8" Plug (air relief) for Executive wet ends.
Vane gap : 13mm Diameter : 97mm
No Longer Available
Diameter : 97mm Vane gap : 18mm
The MOST common impellor used in European Waterway pumps. The same impellor is used in 48 and 56 frame wet ends.
Any of these impellor codes are no longer available, we send an alternative replacement from Waterway which although looking different fits and works as an exact replacement. You cannot buy the 310-4300 or 313-2410. They are no longer made. You can use the 310-4180 and this is what we will ship.
Sometimes found screwed into the wet end of hot tub pumps and incorporated into a bleed system. They always seem to snap off when working on wet ends. This part has been discontinued by the manufacturer and there is no alternative made by other companies. Use 672-4350
Sometimes found screwed into the wet end of hot tub pumps and incorporated into a bleed system. They fit US manufactured pumps - Waterway Pumps, Aqua Flo Pumps, Balboa Pumps They do not fit - LX Pumps
Vibration stopping mounts for 48frame pumps. Sold in pairs
Vibration stopping mounts for 56frame pumps. Sold in pairs
Two part seal kit for the Waterway Tiny Might circ pump. Does not fit any other pumps.
To fit every Waterway wet end. ORIGINAL Waterway Silicone Carbide Pump Seals. Not to be confused with cheaper, generic seals. (Originals have rubber surrounds, rust in colour)
Pump seal lubricant to aid the installation and longevity of new seals. Manufactured by US Seal, the same as ALL our replacement seals. Sold in x2 different sizes - choose using the drop down box. 5cc for a "one use" application - perfect for installing one seal only. 4oz for installing 10+ seals (service use)
Turns a 2" wet end into 2-1/2" .... perfect for front face Waterway pumps. Waterway 415-6010 2" FBT x 2.5" MBT Union Adapter with o ring. If you need this fitting, please contact us first with your previous order number of a Waterway pump. We have very limited stocks of this Waterway part and must limit sales of this fitting to our customers who have...
Executive Euro volute. 48 frame bolt fitment. 315-1220 is imprinted on the rear of the plastic, however this is the plastic moulding part number for the volute. If Waterway install brass screw threads into the 48 frame position it changes the part to 1240 .... a tad confusing but if you study the pictures it is easy.
Executive Euro volute. 56 frame bolt fitment. 315-1220 is imprinted on the rear of the plastic. (Caution - 315-1220 is also imprinted on the 48 frame version - study the pictures and look at the brass screw threads)
Screw for Waterway wet ends. Screws through the front face and onto the rear of the wet end.
Pack of x4 bolts for 48 frame wet ends, commonly used on EMG motors. They will fit Waterway and Aqua Flo 48 frame wet ends.
Pack of x4 bolts for 56 frame wet ends, commonly used on EMG motors. They will fit Waterway and Aqua Flo 56 frame wet ends.