60-1008 Long probe version, Length of grey probe arm: 46mm (1-7/8") Outer thread diameter: 20mm (3/4"), Total Length: 90mm.
Aqualarm flow switch with 1.5" slip connections. Normally open switch, 0.5 Amp.
Gecko surface mount flow sensor for Gecko XE and YE heaters. If you have a flow error with your heater, this is absolutely a first stage repair, to try, before moving onto more expensive parts, ie the spa pack. Supplied : Small plastic block and cable. x2 bolts x1 self adhesive pad (postage stamp size) (July 2023 - We are the first company in the World to...
THIS IS THE MOST COMMON HARWIL. This is the switch ONLY and will fit the three styles of Tee, pictured. With a cable and plug. Thread diameter : 1" Grey probe length : 1-1/4"
Flow Switch 1A 3/4" Barb x 1/2" Slip 24" Cord w/2 Pin Connector. Used on Dimension 1 Spas since it has a socket end on the plastic tee to be glued onto the Laing heater. If you don't need the plastic assembly, just buy the switch shown below as an accessory.
Plastic assembly 3/4" x 3/4" x 3/4" fitted with switch Q-12DS Thread diameter : 1"Grey probe length : 1-1/4" If you don't need the plastic assembly, just buy the switch shown below as an accessory.
Plastic assembly 3/4" x 3/4" fitted with switch Q-12DS Thread diameter : 1"Grey probe length : 1-1/4" If you don't need the plastic assembly, just buy the switch shown below as an accessory.