This section represents the most common parts and accessories requested for the care of your spa.
Every part can be identifiable with a simple comparison of a photograph and the details.
If you are unsure, call us on the number at the top of the website.
The AG+ is a silver ion based mineral sanitiser. It sits inside the filter used for circulation, usually the filter with the grey cap. Lasts 4 months.
Innovative FibreCor insulation fills your spa cabinet completely to fully insulate your spa. Can be used on Hot-springs spas and ANY other brands where there is space inside the cabinet.
Corona Discharge high output ozonator.
Original Hot-springs Part. Lift and Glide Cover Lifter. The lifter is easy to install and ready to ship. This lifter only requires fourteen inches (14″) of rear clearance and three inches (3″) on each side. Installation instructions are available as a download at the bottom of this page.
The Scepter Salt Cell® A.C.E replacement salt cell. USA Made. The ultimate solution for replacing the Hot Springs ace cell. After 4 years of replacing ace cells, the manufacturer has learnt a lot about the ace system design. The Scepter is made to perform better by improving flow design and placing cell outside the filter. Clear housing makes it easy to...
Original Hot-springs Product. Plastic back insulation blanket designed to help keep the equipment compartment warm. This can be used on essentially every Hot-Springs, Limelight, Hot Spot and Tiger River models from 1992 to 2022