No products
Prices are tax included
List of products by supplier: Misc
-
£37.56 -
£27.41Waterway Pop Up Water Feature 675-0791L
Grey has been discontinued. The only available choice is now a clear jet, see the second picture. Everything else remains the same with fitting sizes etc.
£27.41 -
£8.75Waterway Power Storm Diffusers 218-6610
Broken Waterway Jets? Replace only the rear piece and save money.
£8.75 -
£8.18Waterway Power Storm Diffusers - Thread-In
THREAD-IN DIFFUSERS. Broken Waterway Jets? Replace only the rear piece and save money. SALES NOTE : These are for the New Style of Thread-In style of Waterway jet - See picture
£8.18 -
£1.71Waterway Power Storm Jet Nozzle 12gpm 217-6600
Fits inside all Power Storm jets, except for clear LED Jets.
£1.71 -
£1.52Waterway Power Storm jet orifice 218-6620
Fitted (loosely) into the rear of Waterway Power Storm jets to channel the water through the jet.
£1.52 -
£30.79 -
£41.43Waterway Power Storm, Stainless, Massage 212-7367S
Power Storm 5-1/2" Diamater. Stainless Steel Massage jet.
£41.43 -
£41.43Waterway Power Storm, Stainless, Massage 212-7747S
This is the 5" diameter Power Storm jet in grey and stainless. It is discontinued. We have the 5-1/2" version. If your spa can accommodate this diameter, buy this product and we will send you the 5-1/2"
£41.43 -
£36.13 -
£6.73Waterway pump mount for 48frame (smooth... 672-1110
Dimensions : 15-1/2" (39cms) x 8-1/2" (21cms)
£6.73 -
£92.16Waterway Pump Trap 2" x 2" 310-6600
Waterway pump trap assembly. 2" inlet and connects to any Waterway pump using a 2" suction wet end. The best pumps to use with this product are shown below in accessories.
£92.16 -
£1.38Waterway pump union 1" 400-1940
Pump union with a 3/4" barb end. Traditionally used with the Red Waterway Tiny Might circulation pump pictured.
£1.38 -
£1.38Waterway pump union 1" 400-1990
Pump union with a 1" socket end. Traditionally used with the Red Waterway Tiny Might circulation pump pictured.
£1.38 -
£1.66Waterway Pump Union Gasket 2" (pair) 711-4010(x2)
Pump seal to fit 2" unions - flat type. Because this is a flat seal on both sides it will work with ALL 2" pump unions. Sold in pairs Gaskets are always measured by the internal diameter size of the pipe the fitting is connected to - really confusing when nothing measures what it says. To help, the outside diameter of these is 3" Every hot tub part is...
£1.66 -
£2.98Waterway Pump Union Gasket 2" 1/4" thick 711-4020(x2)
Pump seal to fit 2" unions - flat type. This gasket is 1/4" thick. Sold in pairs Gaskets are always measured by the internal diameter size of the pipe the fitting is connected to - really confusing when nothing measures what it says. To help, the outside diameter of these is 3" Every hot tub part is measured in inches.
£2.98 -
£41.08Waterway Quad Flo Swim jet 212-4510
Discontinued - Only available stock on hand. Check with us first as we have very limited numbers.
£41.08 -
£249.49Waterway Rip Current Swim Jet 210-5168S-DSG
2-1/2" slip x 1" spiggot Stainless Rip Current Swim Jet Supersedes the older version Swim Jet
£249.49 -
£365.00Waterway Single speed 3.5hp VIPER pump P3.5-56-1-V2.5
3.5hp single speed 12.4 amp motor. The most powerful single speed Waterway pump. Waterway produce two pumps for the European market. They use special 2-1/2" suction and 2-1/2" discharge Viper wet ends. These pumps are not to be confused with hot tub pumps.
£365.00 -
£2.90Waterway Spacer Ring 711-1010
Filter spacer ring found at the bottom (under the filter) of many Waterway filters. (See diagrams)
£2.90 -
£4.49Waterway Stainless Steel Escutcheon 916-6090
Stainless Steel escutcheon to fit Waterway Poly jets and Waterway 2" Scalloped divertors. See the additional pictures for the style of jet and divertor they fit. Self adhesive backing attaches the escutcheon into the small channel around the front face of the jet or onto the top of the divertor.
£4.49 -
£4.49Waterway Stainless Steel Escutcheon 916-0030
Stainless Steel escutcheon to fit Waterway Mini Jets. Self adhesive backing attaches the escutcheon into the small channel around the front face of the jet.
£4.49 -
£15.94 -
-
£12.39Waterway Standard Poly Neck Jet 212-7027 212-7029-STS
Waterway have discontinued Grey. The jets are now available in a light colour Grey. (Our historic picture is original grey, you will receive a light grey.)
£12.39 -
Waterway Super Flo NLA
This wet end along with any associated parts are longer available from Waterway. It can be identified as have 4 cut corners on the front face - see picture. The replacement would be the Super Hi Flo as shown below in "accessories" If you have a (pretty rare) 2-1/2" Super Flo, the replacement would be the Executive Euro shown below in "accessories"
-
Waterway Super Hi-Flo 200GPM Suction 640-3850
Suction with 2" pipe socket fitting Discontinued. SOLD OUT
-
£25.96Waterway Super Hi-Flo 200GPM Suction 640-3570
Suction with 2" pipe socket fitting and back nut.
£25.96 -
£26.63Waterway Super Hi-Flo 200GPM Suction 640-3580
Suction with 2.5" pipe socket fitting. Back nut style
£26.63 -
£7.47 -
£39.46Waterway Super Hi-Flo 200GPM Suction... 640-3570S
Suction with 2" pipe socket fitting and back nut.
£39.46 -
£8.06Waterway Tailpiece, 2in. Buttress x 2 SPG... 413-2160
Waterway 413-2160 Tailpiece, 2in. Buttress x 2 SPG with 1-1/2Fpt
£8.06 -
£85.78 -
£85.78 -
£47.10Waterway top mount basket 519-2097
Item number 2 from the exploded diagram Only available in grey.
£47.10 -
£15.32Waterway trim ring - Diameter 200mm 519-8070
Item number 1 in the exploded diagram. Diameter : 200mm LOW Volume
£15.32 -
£15.32Waterway trim ring - Diameter 200mm 519-8050
Item number 2 in the exploded diagram. Diameter : 200mm HIGH Volume
£15.32 -
£25.49Waterway Ultra Skim - lid 519-8169-DSG
Item number 1 from the exploded diagram. Only available in dark silver glitter.
£25.49 -
-
£50.04 -
-
£29.56 -
£15.83 -
£1.32 -
£1.38Waterway wet end face plate screw 819-1110
Screw for Waterway wet ends. Screws through the front face and onto the rear of the wet end.
£1.38 -
£11.92Waterway Whirlpool Diffusers 218-1600
Broken Waterway Jets? Replace only the rear piece and save money.
£11.92 -
£31.30 -
£31.30 -
£143.27 -
£6.53 -
£6.53 -
£63.78Weir door assembly 550-6607
Item number 11 in the exploded diagram 355mm x 133mm Has 519-6600 imprinted into the plastic. Only available in Grey.
£63.78 -
£25.24 -
£13.81Weir door assembly - 130mm wide 519-4050
Item number 1 (door) and 2 (foam) from the exploded diagram. Height 120mm Width 130mm The door is 519-XXXX Available in white, grey or black.
£13.81 -
£13.81 -
£4.54 -
£9.88Wet end bleed nipple and o ring
Hotspring Wet end 1/4" bleed nipple and o ring. Uses 1/4" pipe.
£9.88 -
£2.76Wet end bolts - 48 Frame 48 bolts (x4)
Pack of x4 bolts for 48 frame wet ends, commonly used on EMG motors. They will fit Waterway and Aqua Flo 48 frame wet ends.
£2.76 -
£2.76Wet end bolts - 56 Frame 56 bolts (x4)
Pack of x4 bolts for 56 frame wet ends, commonly used on EMG motors. They will fit Waterway and Aqua Flo 56 frame wet ends.
£2.76 -
£94.88 -
£69.94Wet End: 1.5hp Niagara (Ultimax) 1215160
1.5hp Niagara (Ultimax) wet end. If you need a complete pump, contact us as we build pumps based on horsepower and motor frame size.
£69.94 -
£69.94Wet End: 1hp Niagara (Ultimax) 1215021
1hp Niagara (Ultimax) wet end. If you need a complete pump, contact us as we build pumps based on horsepower and motor frame size.
£69.94 -
Wet End: 2" Executive Euro 48f (2hp impellor) 310-1890
48frame - 2hp impellor This part has been discontinued by Waterway, we have now sold out. Please contact us for alternative options.
-
£94.88 -
£94.88 -
£69.94Wet End: 2hp Niagara (Ultimax) 1215011
2hp Niagara (Ultimax) wet end. If you need a complete pump, contact us as we build pumps based on horsepower and motor frame size.
£69.94 -
£74.18 -
£69.94Wet End: 3hp Niagara (Ultimax) 1215012
3hp Niagara (Ultimax) wet end. If you need a complete pump, contact us as we build pumps based on horsepower and motor frame size.
£69.94 -
£74.18Wet End: 3hp Vico Ultrajet (Ultima) 1215145
The most common Vico wet end in Europe. Fitted to hundreds of Hydropool and Canadian Spa hot tubs.
£74.18 -
£69.94 -
£89.00 -
£21.46Whirlpool jet body 1-1/2" x 1/2" 212-2000
Waterway Whirlpool 1-1/2" Slip x 1/2" Slip Jet Body Assembly with Flat Gasket.
£21.46 -
£59.98Winterising Blanket
Original Hot-springs Product. Plastic back insulation blanket designed to help keep the equipment compartment warm. This can be used on essentially every Hot-Springs, Limelight, Hot Spot and Tiger River models from 1992 to 2022
£59.98 -
£35.80 -
£508.53 -
£42.73 -
£796.51 -
£562.95 -
£42.73 -
£52.58 -
£9.27 -
£6.00 -
£1.55 -
£1.78 -
£84.22x24 Career Floating Rubber Ducks
x24 Career floating ducks. A great way to get a whole batch of ducks ! ... different designs. Weighted to stay upright. From the largest US manufacturer of ducks !
£84.22 -
£39.63 -
£20.91 -
£20.91 -
£20.91 -
£20.91XP2 impellor Sundance Circ pump fit 91694251
XP2 impellor made specifically for the Sundance XP Circ pump. This does not fit and work in any other wet end motor combination.
£20.91 -
£76.92XP2 wet end complete 1.5hp AF91041609-000
48frame wet end. Complete with front and rear, impellor and seal. Centre to Centre bolt distance : 92mm
£76.92 -
£76.92XP2 wet end complete 2hp AF91041610-000
48frame wet end. Complete with front and rear, impellor and seal. Centre to Centre bolt distance : 92mm
£76.92 -
£76.92XP2 wet end complete 2hp 6.3" AF91041632-000
56frame wet end. Complete with front and rear, impellor and seal. Centre to Centre bolt distance : 104mm
£76.92 -
£76.92XP2 wet end complete 3hp AF91041612-000
48frame wet end. Complete with front and rear, impellor and seal. Centre to Centre bolt distance : 92mm
£76.92 -
£7.37ZORBO Scum absorber Zorbo
ZorbO actually absorbs up to 15 times its weight in oil scum and lotion residues out of the water.
£7.37