Fix A Leak - One Dose (8oz)

Fix-A-Leak for Swimming Pools & Spas.

Fix-A-Leak is a blended concentrated material designed to seal leaks in virtually any material. 
It can be applied for leaks in the shell and works equally well in the plumbing. Seals holes 1/8" in diameter and will form a permanent seal.

Use 8 oz. per 1,000 gallons for minor leaks. A second bottle can be added for larger leaks. Do not use in excess of 1 quart per 5000 gallons of water.

FIX-A-Leak has been thoroughly field tested under various weather conditions, and has proven to be effective in sealing leaks.

FIX-A-LEAK is also an excellent preventative maintenance aid, as it coats all surfaces that it comes in contact with, it cuts down on formation of rust and corrosion.

Recommended By Many Spa Manufacturers and Dealers.

#1 In Repairing Those Hard To Find Leaks.

GENERAL INFORMATION

FIX-A-Leak :

Is a blended concentrated material designed to seal leaks in virtually any material.
Can be applied for leaks in the shell and works equally well in the plumbing.
Will seal holes 1/8" in diameter.
Will form a permanent seal Use 1 quart per pool up to 22,000 gallons.
Do not use in excess of 1 quart per 5000 gallons of water.
Usually 16 oz will fix a small leak in a spa.

DIRECTIONS (For Spa/Hot Tub)

Shake Well Before Using

1. Remove FILTER(s) before adding FIX-A-Leak to spa/hot tub water. 
2. With all pumps running on high speed add FIX-A-LEAK slowly through water return or filter compartment. 
3. FIX-A-Leak is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension 4-6 hrs. Do this by turning on all pumps again and let them run for approximately one hour. 
5. Continue to recirculate water until the leak has stopped.

How do you know if leak has stopped ? 
The water level is not lowering or The ground around spa/hot tub is dry.

6. Mark level of water in spa and check for 2-3 days to determine if the leak has stopped. 
7. After the leak has stopped and given the proper time to cure (To cure drain spa for 24-48 hrs.) you may return to normal filtration.