P2-48-1-CD1.5J
New product
The best replacement for the Spaform J250 pump.
This product is no longer in stock
Availability date:
The J250 pump used by Spaform is long since discontinued and there are NO PARTS available. We have looked at various replacement options for our customers and we are now able to offer the BEST replacement for you.
The pump is supplied with the wet end facing the correct way (see pictures) and we also install the exact same pump unions. Once fitted into the hot tub, the pump union to the side locates into almost EXACTLY the place as the original.
To date, it is the best alternative on the market........your only other option is to change the pump to an entirely different model with expensive plumbing changes.
Our pump option will give you the closest fit possible from an aftermarket pump - you will need to increase (wood block) the height of the pump and you might have some slight plumbing to do, but nothing like trying to integrate another brand/model.
If you have any questions, do not hesitate to call 02392 160929
The Max Air blower with 2hp motor has been...
Elbow 90° 2 inch socket x spigot
£11.99
Laing E10 The MOST Common Laing in Europe. UK...
£175.00
Seal kit to fit the ITT Marlow, traditionally a...
£11.49
Pump seal to fit 2" unions - flat type. Because...
£1.66
1-1/2" heater or pump union gasket which is...
£1.13
Item number 15 in the exploded diagram. (3 parts)
£37.75
Spring steel clamp for 3/8" pipe (air systems)
£0.39
This board has been discontinued by Balboa....
Clear vinyl 1/4" ID x 3/8" OD. Used as OZONE...
£2.62